URETHANE TOOLING & ENGINEERING CORP
Phone: 1(615)510-3009 Fax: 1(615)510-3010
Web Site: http://www.urethanetooling.com E-Mail: utec@urethanetooling.com
Back to UTEC Home Page |
Back to General/Standard
Product Information
UTEC SPRINGBACK DEVELOPMENT SYSTEMS-TOOLS-KITS-SERVICES
MEASURING KIT SYSTEM:
Measuring Kit System includes Microscope, Stand, Lighjting, Camera, Camera Software,
Adjustable Stage, Part Container, Spreadsheet for Punch Diameter/Part Diameter.
Springback of Material to determine Punch Diameter for any given Part Diameter
$ /Lot
DEVELOPMENT RETAINER SYSTEMS WITH DIE PADS, CUSHION PADS, WEAR PADS:
UT-01-0500 X 12", 1" X 1/2" Press Brake Die Retainer $ /Ea.
1/2" X 1" X 12" Die Pads, one each inN UT-15, UT-25, $ /Lot
UT-35, UT-05
3/4" X 1" X 12" Die Pads, one each in UT-15, UT-25, $ /Lot
UT-35, UT-05
1/4" DIAMETER X 12" Die Pad Cushions, one each in $ /Lot
UT-15, UT-25, UT-35, UT-05
.020" X 2" X 50' Wear Pad Roll UT-15 $ /Ea.
Subtotal $ /Lot
Development Retainer Discount Less 20% $ - /Lot
Net Subtotal $ /Lot
UT-02-0750 X 12", 2" X 3/4" Press Brake Die Retainer $ /Ea.
3/4" x 2" x 12" Die Pads, one each in UT-15, UT-25, $ /Lot
UT-35, UT-05
1" X 2" X 12" Die Pads, one each in UT-15, UT-25, $ /Ea.
UT-35, UT-05
1/2" Diameter X 12" Die Pad Cushions, one each in $ /Lot
UT-15, UT-25, UT-35, UT-05
.020" X 3" X 50' Wear Pad Roll UT-15 $ /EA.
Subtotal $ /Lot
Development Retainer Discount Less 20% $ - /Lot
Net Subtotal $ /Lot
UT-03-1000 X 12", 3" X 1" Press Brake Die Retainer $ /Ea.
1" X 3" X 12" Die Pads, one each in UT-15, UT-25, $ /Lot
UT-35, UT-05
1-1/4" X 3" X 12" Die Pads, one each in UT-15, $ /Lot
UT-25, UT-35, UT-05
3/4" Diameter X 12" Die Pad Cushions, one each in $ /Lot
UT-15, UT-25, UT-35, UT-05
.020" X 5" X 50' Wear Pad Roll UT-15 $ /Ea.
Subtotal $ /Lot
Development Retainer Discount Less 20% $ - /Lot
Net Subtotal $ /Lot
UT-06-1000 X 12", 6" X 1" Press Brake Die Retainer $ /Ea.
1" X 6" X 12" Die Pads, one each in UT-15, UT-25, $ /Lot
UT-35, UT-05
1-1/4" X 6" X 12" Die Pads, one each in UT-15, $ /Lot
UT-25, UT-35, UT-05
1-1/2" Diameter X 12" Die Pad Cushions, one each in $ /Lot
UT-15, IT-25, UT-35, UT-5
1/8" X 8" X 48" Wear Pad Sheet SHEET UT-15 $ /Ea.
Subtotal $ /Lot
Development Retainer Discount Less 20% $ - /Lot
Net Subtotal $ /Lot
4 Retainer Subtotal $ /Lot
4 Retainer Additional Discount Less 12.5% $ - /Lot
Net Grand Total For 4 Development Retainer System $ /Lot
DEVELOPMENT PUNCH SYSTEMS WITH SAFETY TANG X 2", SET INCLUDES:
14 Punch Set Master Complete - .015"R 30 Degree, .500"R, 1.000"R,
2.000"R, 3.000"R, 4.000"R, 5.000"R,
6.000"R, 7.000"R, 8.000"R, 9.000"R,
10.000"R, 11.000"R, 12.000"R $ /Lot
7 Punch Set Master Odd - .015"R 30 Degree, 1.000"R, 3.000"R, 5.000"R,
7.000"R, 9.000"R, 11.000"R $ /Lot
7 Punch Set Master Even - .0500"R, 2.000"R, 4.000"R, 6.000"R, 8.000"R,
10.000"R, 12.000"R $ /Lot
8 Punch Set 0015 - .015"R 30 Degree, .032"R 30 Degree, .062"R 30 Degree
.125"R 30 Degree,.187"R 30 Degree .250"R 30 Degree,
.312"R 30 Degree, .375"R 30 Degree $ /Lot
4 Punch Set 0015 Odd - .015"R 30 Degree, .062"R 30 Degree, .187"R
30 Degree, .312"R 30 Degree, $ /Lot
4 Punch Set 0015 Even - .032"R 30 Degree, .125"R 30 Degree, .250"R
30 Degree, .375"R 30 Degree $ /Lot
8 Punch Set 0500 - .500"R, .562"R, .625"R, .687"R, .750"R,
.812"R, .875"R, .937"R $ /Lot
4 Punch Set 0500 Odd - .500"R, .625"R, .750"R, .875"R $ /Lot
4 Punch Set 0500 Even - .562"R, .687"R, .812"R, .937"R $ /Lot
8 Punch Set 1000 - 1.000"R, 1.125"R, 1.250"R, 1.375"R,
1.500"R, 1.625"R, 1.750"R, 1.875"R $ /Lot
4 Punch Set 1000 Odd - 1.000"R, 1.250"R, 1.500"R, 1.750"R $ /Lot
4 Punch Set 1000 Even - 1.125"R, 1.375"R, 1.625"R, 1.875"R $ /Lot
8 Punch Set 2000 - 2.000"R, 2.125"R, 2.250"R, 2.375"R,
2.500"R, 2.625"R, 2.750"R, 2.875"R $ /Lot
4 Punch Set 2000 Odd - 2.000"R, 2.250"R, 2.500"R, 2.750"R $ /Lot
4 Punch Set 2000 Even - 2.125"R, 2.375"R, 2.625"R, 2.875"R $ /Lot
8 Punch Set 3000 - 3.000"R, 3.125"R, 3.250"R, 3.375"R,
3.500"R, 3.625"R, 3.750"R, 3.875"R $ /Lot
4 Punch Set 3000 Odd - 3.000"R, 3.250"R, 3.500"R, 3.750"R $ /Lot
4 Punch Set 3000 Even - 3.125"R, 3.375"R, 3.625"R, 3.875"R $ /Lot
8 Punch Set 4000 - 4.000"R, 4.125"R, 4.250"R, 4.375"R,
4.500"R, 4.625"R, 4.750"R, 4.875"R $ /Lot
4 Punch Set 4000 Odd - 4.000"R, 4.250"R, 4.500"R, 4.750"R $ /Lot
4 Punch Set 4000 Even - 4.125"R, 4.375"R, 4.625"R, 4.875"R $ /Lot
8 Punch Set 5000 - 5.000"R, 5.125"R, 5.250"R, 5.375"R,
5.500"R, 5.625"R, 5.750"R, 5.875"R $ /Lot
4 Punch Set 5000 Odd - 5.000"R, 5.250"R, 5.500"R, 5.750"R $ /Lot
4 Punch Set 5000 Even - 5.125"R, 5.375"R, 5.625"R, 5.875"R $ /Lot
8 Punch Set 6000 - 6.000"R, 6.125"R, 6.250"R, 6.375"R,
6.500"R, 6.625"R, 6.750"R, 6.875"R $ /Lot
4 Punch Set 6000 Odd - 6.000"R, 6.250"R, 6.500"R, 6.750"R $ /Lot
4 Punch Set 6000 Even - 6.125"R, 6.375"R, 6.625"R, 6.875"R $ /Lot
8 Punch Set 7000 - 7.000"R, 7.125"R, 7.250"R, 7.375"R,
7.500"R, 7.625"R, 7.750"R, 7.875"R $ /Lot
4 Punch Set 7000 Odd - 7.000"R, 7.250"R, 7.500"R, 7.750"R $ /Lot
4 Punch Set 7000 Even - 7.125"R, 7.375"R, 7.625"R, 7.875"R $ /Lot
8 Punch Set 8000 - 8.000"R, 8.125"R, 8.250"R, 8.375"R,
8.500"R, 8.625"R, 8.750"R, 8.875"R $ /Lot
4 Punch Set 8000 Odd - 8.000"R, 8.250"R, 8.500"R, 8.750"R $ /Lot
4 Punch Set 8000 Even - 8.125"R, 8.375"R, 8.625"R, 8.875"R $ /Lot
8 Punch Set 9000 - 9.000"R, 9.125"R, 9.250"R, 9.375"R,
9.500"R, 9.625"R, 9.750"R, 9.875"R $ /Lot
4 Punch Set 9000 Odd- 9.000"R, 9.250"R, 9.500"R, 9.750"R $ /Lot
4 Punch Set 9000 Even - 9.125"R, 9.375"R, 9.625"R, 9.875"R $ /Lot
8 Punch Set 10000 - 10.000"R, 10.125"R, 10.250"R, 10.375"R,
10.500"R, 10.625"R, 10.750"R, 10.875"R $ /Lot
4 Punch Set 10000 Odd - 10.000"R, 10.250"R, 10.500"R, 10.750"R $ /Lot
4 Punch Set 10000 Even - 10.125"R, 10.375"R, 10.625"R, 10.875"R $ /Lot
8 Punch Set 11000 - 11.000"R, 11.125"R, 11.250"R, 11.375"R,
11.500"R, 11.625"R, 11.750"R, 11.875"R $ /Lot
4 Punch Set 11000 Odd - 11.000"R, 11.250"R, 11.500"R, 11.750"R $ /Lot
4 Punch Set 11000 Even - 11.125"R, 11.375"R, 11.625"R, 11.875"R $ /Lot
8 Punch Set 12000 - 12.000"R, 12.125"R, 12.250"R, 12.375"R,
12.500"R, 12.625"R, 12.750"R, 12.875"R $ /Lot
4 Punch Set 12000 Odd - 12.000"R, 12.250"R, 12.500"R, 12.750"R $ /Lot
4 Punch Set 12000 Even - 12.125"R, 12.375"R, 12.625"R, 12.875"R $ /Lot
14 - 8 Punch Set Total $ /Lot
14 - 8 Punch Set Discount Less 15% $- /Lot
Net Grand Total For 14 Punch Sets $ /Lot
14 - 4 Punch Sets Odd or Even Total $ /Lot
14 - 4 Punch Sets Odd or Even Discount Less 15% $- /Lot
Net Grand Total for 14 4 Punch Sets Odd or Even $ /Lot
1 Punch Master with Flat Blank Face for machining purposes - Aluminum $ /Ea.
1 Punch Master with Flat Blank Face for machining purposes
- Tool-A-Thane Urethane $ /Ea.
SPRINGBACK CLUB:
Submit one Springback Development Using the above tools for your
Springback Development and get access to one available Springback
Development that is one the Springback Club Listing. Subject to
Availability. $ 0.00/Ea.
If you don't have the above items to do a Springback Development,
pay for one Springback Development that is available at the club $ /Ea.
For a brand new Springback Development customer to provide specified
material with detailed specs for that material. UTEC to do new
Springback Development for your radius and other $ /Lot
Springback Development to provide all the information needed that
is on our Spreadsheet used for the Springback Developments.
TECHNICAL SUPPORT:
Technical Support for Development Retainers/punch Sets/Measuring Kit
System. Whe purchasing Development Retainers and/or Development Punch
Set/s and/or Measuring Kit System, first 3 months technical support is
free. $ /year
or $ /mnth
Technical Support Onsite, minimum one day and all expenses. Onsite $ /Day
Technical Support doesn't apply against 3 months free technical & all expenses
support
For prices Click here:
TOOL-A-THANE Springback Development Systems Tools-Kits-Services