Back to UTEC Home Page |
Back to UTEC Product Information Page
Back to UTEC Home Page |
Back to UTEC Product Information Page
UT-5 Tool-A-Thane, 75
durometer shore D, 5% Deflection for optimum life, Greatest abrasion
and wear resistance, Excellent machinability, Highest load bearing
capacity, Closest to steel replacement in standard forming operations
i.e. matching dies, blocks, jaws, etc.
UT-10 Tool-A-Thane, 60
durometer shore D, 10% Deflection for optimum life, High abrasion
and wear resistance, Good machinability, High load-bearing capacity,
Special forming applications.
UT-15 Tool-A-Thane, 95
durometer shore A, 15% Deflection for optimum life, Best tear
strength and cut resistance, High load-bearing capacity, Definition
with less penetration, Generally used for forming heavier and
tougher metals.
UT-25 Tool-A-Thane, 90
durometer shore A, 25% Deflection for optimum life, Good load-bearing
capacity and best abrasion and wear resistance, Best General purpose
material.
UT-35 Tool-A-Thane, 83
durometer shore A, 35% Deflection for optimum life, Lower load-bearing
capacity, best for lighter gages and softer materials.
UT-703 Tool-A-Thane, 73
durometer shore A, 35% Deflection for optimum life, Low load-bearing
capacity, Best for very light gages and very soft materials.
UT-605 Tool-A-Thane, 65
durometer shore A, 35% Deflection for optimum life, Low load-bearing
capacity, Best for extremely light gages and extremely soft materials.
UT-505 Tool-A-Thane, 55
durometer shore A, Lowest load-bearing capacity, Not for forming
applications.
UT-405 Tool-A-Thane, 45
durometer shore A, Limited special applications.
UT-305 Tool-A-Thane, 35
durometer shore A, Limited special applications.
UT-Special Formulations,
special shore A or D, Formulation changes can change properties
resulting in extremely high qualities in one or more specific
properties for special or extremely abusive applications. Other
durometer materials available. Please consult factory for specifics.